HPLC - UV/VIS Spectroscopy
Fibre Optic and Diode Array Applications
Software - Fluorescence
| Overview | Specifications | Ordering Information | Print Version | Documentation |
Solvent ConditioningOne of the main functions of the Smartline Manager is to control the eluent flow to the pumping system. The unit can be configured with various degassing and low pressure gradient control valve modules. The design of the system allows for optimum tubing layout while maintaining the necessary short connections paths.
Interface Card
For additional system control functions the module can be fitted with an interface card for direct control of non-Knauer devices via analogue and relay outputs..
Degasser
The integrated degasser module uses a newly developed micro vacuum pump and a novel fluoropolymer instead of the conventional ptfe membranes. This permits a significant reduction of the dead-volume of the degasser and improved convenience when changing eluents etc.
Gradient Module
The low pressure gradient module uses a valve block made of PEEK material and is thus suitable for practically any application, particularly in the biotechnolgy sector.
Simple to use
The module can be controlled either by the pump unit as a stand-alone module or using our Geminyx software. Versions of Geminyx are also available, which conform to the FDA 21 CFR Part 11 requirements.
| Dimensions | 226 x 135 x 390 mm (W x H x D) | |||
| Weight | 4.8 kg | |||
| Power supply | via Smartline Pump 1000 or WellChrom K-1001 Pump | |||
| Low Pressure Gradient Module | ||||
| Number of eluents | up to 4 | |||
| Gradient range | 0 - 100% | |||
| Gradient increment | 1% | |||
| Gradient accuracy | ± 0.5% | |||
| Gradient precision | better than 1 % RSD Relative Standard Deviation | |||
| Maximum flow | 50 ml/min per channel | |||
| Control | via Smartline Pump 1000 | |||
| Degasser module | ||||
| Maximum flow rate | Analytical up to 10 ml/min., semi-preparative up to 50 ml/min. ml/min | |||
| Number of channels | Analytical 4, semi-preparative 2 | |||
| Degassing method | Gas permeation through PTFE-AF amorphous fluoropolymer membrane | |||
| Degassing efficiency | Better than 0.5 ppm residual dissolved O2 at 1 ml/min | |||
| Dead volume | Analytical 480 µL per channel, semi-preparative 7.7 ml per channel | |||
| Solvent resistance | Universal except for fluorinated hydrocarbons | |||
| Wetted materials | PEEK, PCTFE, PTFE-AF | |||
| Vacuum chamber | Polypropylene and stainless steel | |||
| Vacuum pump | Micro vacuum pump with variable stepping motor | |||
| All specifications may be subject to change for technical reasons. | ||||
Ordering Information
| A5313 | Smartline Manager with analytical degasser and lpg module | |||
| A5316 | Smartline Manager with analytical degasser | |||
| A5317 | Smartline Manager with lpg module | |||
| A5322 | Smartline Manager with semi-preparative degasser and lpg module | |||
| A5323 | Smartline Manager with semi-preparative degasser | |||
| Accessories | ||||
| A531O | Eluent tray incl. 4 one liter bottles | |||
| A5342 | Set of static mixing chambers (A5340, A5341) | |||
| A5340 | Static mixing charnber up to 2 ml/min | |||
| A5341 | Static mixing chamber from 1 - 6 ml/min | |||